• Tam's Crazy Blog About Technology and More…

Archive for September, 2011

Construction Requirements
by Tam

4. Requirements for design bases, foundations and underground parts of tall buildings 4.1. This section provides basic guidance on organization, technology, construction and acceptance of works on the grounds of foundation and underground parts of multifunctional high-rise buildings and complexes with height above ground of more than 75 m. 4.2. Reliability and efficiency of the device of the foundations of tall buildings and structures shall be provided for by taking into account the specific natural, technological and design features of building construction and use of effective technologies for production work. 4.3. Prior to the commencement of works on the underground parts under construction high-rise building customer must execute and submit a contractor building the organization permit (order) on the production of relevant construction works.

4.4. The main construction works altitude of the object are allowed to proceed only after the removal of in-kind platform for its construction, the creation of center geodetic framework, the devices required fencing of the construction site, perform grading, work on the drainage device intrasite roads and utilities and perform other work in accordance with the recommendations of snip 1.12. 4.5. A geodesic framework for the construction stakeout high-altitude facility includes the construction of center network at the construction site and stake out the main or principal axes stakeout facilities as a system of fixed marks points defining the position of buildings on areas and ensuring the implementation of further construction and measurement in the construction process with the required accuracy. When you create a geodesic of center base and the performance of other surveying at construction of the facility should use the guidance snip 03/01/2003.

Comments Off

Photo

September 25th

21:37
Uncategorized

Spring Dealers
by Tam

Already, many dealers do not question the fact that the caller on the phone is a potential buyer, who probably decided on a purchase. Therefore, for any car dealership is important not to lose a client at this phase. But, unfortunately, still not all the leaders have brought to the attention of sellers that claim. In addition to the work of the manager, we evaluated two parts: a website – on a submission of cars on site and truthful in their prices, and "Secretarial unit" – the speed connection to the seller. Detail the technology and the importance of this process we have described in the preceding our rating. Then our study of dealer networks coincided with the beginning of the crisis on automotive market.

Plans Auto-Dealer.ru was figuring out how sellers the most popular brands in Russia include the buyers. Unfortunately, our analysis revealed that most companies are simply spoiled customers who were willing wait in line cherished cars for months. We met not only indifference to myself, but sometimes even arrogant. Came the turn of the spring ratings, and we saw positive signs. Dealer Network demonstrated a level of quality work. Undoubtedly, the merit of a high result is in large holdings, which developed their own standards of communication with customers.

For example, a network of dealers Mazda / Mazda, consisting just of such holdings, again rose to the occasion. The result was even higher than the previous one – 105.13 points. In such companies, everything is perfect: from the call-center, ending the work of managers. Vendors showed their best, trying not to miss a single client. The crisis has forced the weaker companies leave the market. This became especially evident in the dealer network Renault / Renault. Its composition is much reduced, and remained the company, whose efforts, the network and took second place in our ranking – 103.86 points. Dealer network Nissan / Nissan, conceded Renault / Renault, won the third place ranking with a higher result than last time – 103.66 points. A special merit of this result for holdings "Major", "Genser" and "U + Service. more>>

Comments Off

Photo

September 19th

18:16
Uncategorized

Prefabricated Balcony Railings
by Tam

Prefabricated balcony railings, stainless steel, used in private suburban homes and industrial sites. In multi-storey buildings are rare, for lack of need. This is a very practical barriers that look great from the outside. Stainless steel has long been used in setting up homes and other buildings. In private houses balcony railings make it in stainless steel. It does not corrode, practical and aesthetic in the application. Summer is replaced by the winter, sultry heat wade to the bone cold, and balcony railings are stainless steel and will stand for a very long time. In this case, a beautiful polished steel.

She is an excellent suitable for all occasions. Her versatility is proved by time. On larger commercial sites also applied prefabricated balcony railings. Often, they are located inside the building. If the houses you see from the balcony around you area, then in industrial sites balconies often directed inwards, so that would be able to follow proceedings. These are just examples.

In fact, teams of balcony railings, stainless steel apply everywhere. But just for the balcony railings made of stainless steel so popular with customers. If you need an outdoor balcony did not insulated, it is an excellent solution. Why look for something else when you already find what you need! Two main criteria for deciding to choose a prefabricated balcony railings made of stainless steel – a material from which they were made and installation without welding. On the advantage of so we began to have said, but worth mention about the second. Technology "without welding" proven themselves. It is used when installing barriers that come in prefabricated form. Assembly technology as follows: first established the basic or fundamental beam, which carries the rest of the design. This method of fastening or no way inferior welding. For many years this technology, firms have learned to assemble balcony railings made of stainless steel at a high enough level. And to date, this technology is preferable to others. Installation requires very little time (just a few hours). And if set to small space, so more and more convenient because it does not need to haul bulky welder. All this, of course is offered at advantageous prices.

Comments Off

Photo

September 12th

14:33
Uncategorized

© 1998-2012 Page Crazy All Rights Reserved